Impact crushers and impact mills (HSI) are universal and, at the same time, economical solutions. The BHS impact crusher achieves very high crushing ratios in both the first and second stage. This results in a wide range of salable, cubical final products. The impact crusher can be repurposed into an impact mill for manufacturing finer grains by inserting a higher machine base and an additional grinding track. This flexible solution allows you to benefit from excellent crushing results and respond to changing project requirements at any time.
There are a variety of rotors available depending on the specific task at hand. The BHS rotors feature a durable, welded design. All surfaces subject to wear are fitted with replaceable wear parts. The impact bars are replaced from above. Plus, they can be removed quickly and easily thanks to their patented mounting system.
Depending on the application, the impact bars are made of heavy-duty monoblock cast iron or a welded steel structure with replaceable wear elements. The impact bars also easily handle coarser feed material and can be optimally configured for the relevant shredding task. Impact plates are supported by durable, maintenance-free spring units.
Despite their compact dimensions, all BHS impact crushers and impact mills have a very large feed opening. This prevents material jams and allows for optimum use of the crushing chamber even when feeding material of the maximum allowable size. As a result, high throughput rates and excellent crushing results are achieved.
BHS machines feature a durable and compact design. The two-part removable enclosure provides easy access for maintenance work, even in very tight spaces.
The impact chamber liner consists primarily of interchangeable components, which reduces the number of parts you need to keep in stock. In addition to that, the liner parts can also be easily replaced.
Blow bar replacement
Based on the task they are performing, the impact bars are made of chilled cast manganese or chrome. The bars are fastened in place using a patented mounting system, which allows the operator to quickly remove and replace them and to use them on both sides. The simple system saves time and requires less physical strength to operate.
Adjusting the gap width
Three systems are available for adjusting the gap:
|Feed size 1) (max.)||Drive power 2)
|Throughput range 3) (max.)|
|PB 0806||800 mm||620 mm||2 (optionally 3)||400 mm||37 - 55 kW||50 t/h|
|PB 0810||800 mm||1.030 mm||2 (optionally 3)||400 mm||55 - 90 kW||90 t/h|
|PB 1010||1.000 mm||1.030 mm||3||600 mm||90 - 132 kW||135 t/h|
|PB 1013||1.000 mm||1.280 mm||3||600 mm||132 - 160 kW||160 t/h|
|PB 1212||1.250 mm||1.250 mm||4||800 mm||132 - 200 kW||225 t/h|
|PB 1216||1.250 mm||1.580 mm||4||800 mm||160 - 250 kW||335 t/h|
|PM 0806||800 mm||620 mm||2||250 mm||37 - 55 kW||40 t/h|
|PM 0810||800 mm||1.030 mm||2||250 mm||55 - 90 kW||70 t/h|
|PM 1010||1.000 mm||1.030 mm||3||300 mm||90 - 132 kW||100 t/h|
|PM 1013||1.000 mm||1.280 mm||3||300 mm||132 - 160 kW||120 t/h|
|PM 1212||1.250 mm||1.250 mm||4||350 mm||132 - 200 kW||200 t/h|
|PM 1216||1.250 mm||1.580 mm||4||350 mm||160 - 250 kW||300 t/h|
|Type||Feed opening||Outlet flange||Transport dimensions||Weight 4)|
|PB 0806||640 mm||650 mm||1.775 mm||1.120 mm||2.130 mm||1.590 mm||1.900 mm||4.200 kg|
|PB 0810||6410 mm||1.070 mm||1.775 mm||1.540 mm||2.130 mm||2.150 mm||1.900 mm||5.300 kg|
|PB 1010||800 mm||1.060 mm||2.250 mm||1.540 mm||2.820 mm||2.180 mm||2.380 mm||10.500 kg|
|PB 1013||800 mm||1.330 mm||2.250 mm||1.810 mm||2.820 mm||2.450 mm||2.380 mm||11.500 kg|
|PB 1212||1.050 mm||1.280 mm||2.400 mm||1.940 mm||3.040 mm||2.450 mm||2.855 mm||20.000 kg|
|PB 1216||1.050 mm||1.580 mm||2.400 mm||2.270 mm||3.040 mm||2.750 mm||2.855 mm||23.000 kg|
|PM 0806||640 mm||650 mm||1.775 mm||1.120 mm||2.130 mm||1.590 mm||2.120 mm||4.600 kg|
|PM 0810||640 mm||1.070 mm||1.775 mm||1.540 mm||2.130 mm||2.150 mm||2.120 mm||6.100 kg|
|PM 1010||800 mm||1.060 mm||2.250 mm||1.540 mm||2.820 mm||2.180 mm||2.710 mm||13.600 kg|
|PM 1013||800 mm||1.330 mm||2.250 mm||1.810 mm||2.820 mm||2.450 mm||2.710 mm||15.000 kg|
|PM 1212||1.050 mm||1.280 mm||2.400 mm||1.940 mm||3.040 mm||2.450 mm||3.100 mm||22.000 kg|
|PM 1216||1.050 mm||1.580 mm||2.400 mm||2.270 mm||3.040 mm||2.750 mm||3.100 mm||25.000 kg|