The rotor centrifugal crusher type RSMX is a high performance crusher with vertical shaft (VSI) and is used for crushing and refining of mineral materials. It is suitable for all types of mineral materials, including highly abrasive feed materials and feed materials with a high hardness. Depending on its size, high throughput rates of 30 to 400 t/h can be achieved.
Every single particle of the input material undergoes extreme acceleration due to the centrifugal force in the rotor and is hurled against the impact wall. The impact wall can either consist of an anvil ring or alternatively of a material bed. Clogging is avoided due to the generous dimensioning of the rotor and housing. The crushing results can be substantially controlled and optimized by selecting a suitable speed.
Every single particle of the input material undergoes extreme acceleration due to the centrifugal force in the rotor, which hurls the particles against the impact wall. It is possible to achieve a very high cubicity of the end product thanks to high impact stress.
The crushing results remain consistent even as wear and tear increases. Due to the nature of the system, random effects are prevented while material is being shredded. This is another feature that sets the BHS rotor centrifugal crusher apart from other conventional crushers.
Every single grain is subject to selective impact crushing. As a result, more brittle material is shredded to smaller sizes than other materials. This makes it possible to selectively crush brittle aggregate elements or damaged input material and significantly increase the quality of the end products (Los Angeles values, frost resistance). In the case of raw ores and industrial minerals composed of elements that vary in strength, the end product is enriched.
With decades of experience in the field, BHS-Sonthofen is the specialist for crushers with a vertical shaft (rotor crushers and VSIs). One of the milestones in the further development of this machine is the patented twin-chamber rotor.
The machine and drive train are assembled onto a base frame as a unit that is ready for installation. A large cover that can be raised hydraulically and pivoted by 360° allows unimpeded access.
The BHS rotor centrifugal crusher is supplied with a recirculating oil lubrication system that includes cooling and integrated monitoring. This allows for low-maintenance, reliable operation.
All areas of the machine that are in contact with the crushing material are protected by wearing parts that are easy to exchange and made of materials that can be optimized for specific applications. This does away with the need for surfacing or keeping a second rotor in stock.
The rubber spring elements between the base frame and the machine absorb vibrations generated during operation and keep them away from the support structure. Excessive vibrations are registered by an electronic vibration monitor and cause the machine to be shut down.
The input material is supplied to the center of the rotor centrifugal crusher from above. Once in the rotor, the material enters the two large centrifugal chambers, which ensure blockage-free operation and high throughput rates.
The input material is propelled outwards with great force. This is followed by targeted impact against the fixed impact wall or sand bed, resulting in cubically shaped grains.
Compared to the multi-chamber version, less air is transported in the patented twin-chamber rotor. This has a positive effect on power consumption. The energy saved here can then be used to increase throughput rates, and the dust removal system can be operated at reduced power.
The maximum possible material outlet sizes (89° per rotor side) are made possible by the open design of the patented twin-chamber rotor. This significantly reduces the risk of blockage.
A material bed forms along the centrifugal chambers in the BHS twin-chamber rotor to provide autogenous wear protection. Compared to conventional rotors, the number of wear parts that are required is reduced to a minimum.
Area of application
Depending on the input material and the required crushing results, the BHS rotor centrifugal crusher can be operated with either an anvil ring or a sand bed as the impact wall.
In order to increase the service life, a cover with reinforced lining can be selected as an option.
For even faster opening of the machine cover for maintenance and inspection, an optional electro-hydraulic actuation mechanism is available.
To reduce installation times, the quick-change system allows you to replace the entire set of anvil rings with the aid of a hoist if there is sufficient space available to do so.
If required, all electrical wiring can be bundled in a terminal box for easy installation.
In the event of high ambient temperatures or if the material to be processed is hot, a supplementary lubrication unit featuring a larger storage volume and stronger cooling power can be provided.
In order to reduce material deposits in the outlet area, the crusher can be optionally equipped with air cannons.
To provide an alternative means of operation, the machine can be shipped with a PLC controller (including touch panel) and a frequency converter if required. This allows for autonomous operation and monitoring of the machine’s functions.
We can also provide the steel construction, storage bunker and metering equipment, feed and discharge equipment, and dust capture systems – all adapted to your specific applications.
|Drive power||Throughput rate 1)||Input size 2)|
|RSMX 0913||930 x 135 mm||70 m/s||75 - 160 kW||30 - 75 t/h||45 - 56 mm|
|RSMX 0922||930 x 135 mm||70 m/s||90 - 160 kW||30 - 90 t/h||56 - 70 mm|
|RSMX 1222 (Single-Drive)||1.200 x 220 mm||70 m/s||1 x 400 kW||100 - 300 t/h||80 - 100 mm|
|RSMX 1222 (Twin-Drive)||1.200 x 220 mm||70 m/s||2 x 315 kW||100 - 400 t/h||80 - 100 mm|
|RSMX 1426 (Single-Drive)||1.400 x 260 mm||70 m/s||max. 400 kW||200 - 400 t/h||80 - 100 mm|
|RSMX 1426 (Twin-Drive)||1.400 x 260 mm||70 m/s||2 x 315 kW||200 - 500 t/h||80 - 100 mm|
|RSMX 0913||3.950 mm||2.400 mm||2.355 mm||318 mm||990 mm||2.380 mm||7.500 kg|
|RSMX 0922||3.950 mm||2.400 mm||2.355 mm||318 mm||990 mm||2.380 mm||7.800 kg|
|RSMX 1222 (Single-Drive)||5.080 mm||2.860 mm||2.605 mm||457 mm||1.468 mm||2.720 mm||12.100 kg|
|RSMX 1222 (Twin-Drive)||6.700 mm||2.860 mm||2.815 mm||457 mm||1.468 mm||2.996 mm||19.500 kg|
|RSMX 1426 (Single-Drive)||5.080 mm||2.980 mm||2.605 mm||610 mm||1.468 mm||2.793 mm||17.500 kg|
|RSMX 1426 (Twin-Drive)||6.700 mm||2.980 mm||2.895 mm||610 mm||1.468 mm||2.895 mm||20.200 kg|