AUTOMOTIVE SHREDDER RESIDUE (ASR)

Optimally process residual fractions

Optimum recycling of any material

Residual shredder fractions consist of a mixture of recyclable materials. To recover them, the input material must first be shredded. Shredder light fractions (SLF) and shredder heavy fractions (SHF) are generated in phase one. These will have very different compositions based on the input material. Both require compatible process technology in order to extract the valuable materials they contain. As one of the pioneers in residual shredder fraction and material processing, BHS-Sonthofen offers optimal solutions for both fractions.

Benefits at a glance:

  • Excellent selectivity
  • High throughput rates
  • Inexpensive to operate; low energy/wear and tear costs
  • Tried and trusted technology
  • Fully automatic operation possible
  • Many references available
  • European market leader in the processing of fine fractions

Having the right technical system is critical for handling both heavy and light materials

When it comes to processing SHF and, more specifically, SLF, recycling plant operators are required to comply with increasingly strict legal regulations. This applies in particular to how shredder residues contaminated with hazardous substances need to be handled. Against this backdrop, it is all the more important to separate 100% of all recyclable raw materials, not least because this also increases the profitability of recycling. BHS experts will recommend the right system and optimum configuration for any shredding application. Whether you are talking about a single machine or the technical design of an entire plant, the solutions we develop for individual applications are tested at our in-house test center.

Shredder light fraction (SLF)

SLF Output magnetisch.tif

Shredder light fraction (SLF)

Suction is applied in the large shredder’s working chamber to separate the SLF from the SFF. It is not possible to immediately sort the SLF without further mechanical processing due to affinity (the metal particles adhere to other components).

The rotor shredder (type RS) is used to separate composites comprised of multiple materials, some of which are highly entangled. The residual fraction can then be further separated into mineral and organic components. The rotor impact mill (type RPMV) is particularly well suited for the processing of grain sizes of up to approx. 25 mm. It shapes the metallic components into pellets. This makes it possible to readily separate metal fractions from the remaining material in the next step. Components larger than 25 mm in size are processed in the universal shredder (NGU)

Shredder heavy fraction (SHF)

Kopfbild_3.4.04_Shredder-Schwer-Fraktion_1_H_987.jpg

Shredder heavy fraction (SHF)

Shredder heavy fraction (SHF) contains a number of valuable raw materials (metals). The largest share is comprised of aluminum at up to 30%, followed by heavy metals (such as copper, lead, zinc and stainless steel) at up to 20%. The rest is made up of rubber, plastics and mineral components.

In the case of smaller screen fractions of under 25 mm, the metal yield can be increased using BHS technology. The rotor impact mill (type RPMV) cleans and pelletizes the metals. In addition, mineral components are pulverized, which acts to break down the adhesion limits. As a result, the metal fractions can be more effectively recovered during the subsequent separation process.

Video

Efficiently processing shredder fractions

bhs_shredder_light_fraction_2019.mp4
play-button

Efficiently processing shredder fractions

The BHS rotor impact mill is a high-performance crusher with a vertical shaft that addresses the needs of the recycling industry. The mill’s unique impeller rotor works together with a toothed anvil ring to subject the inserted material to severe mechanical stress. Material compounds are crushed and separated selectively, entangled materials are isolated, and brittle-hard materials are crushed very finely. At the same time, metals are shaped into balls and cleaned. Watch the video to find out how to optimally prepare shredder fractions for separation by disaggregating composite material and pelletizing metals with the RPMX rotor impact mill.

Machine portfolio

Rotorshredder (RS)

Crushing, separation and disaggregation – the rotor shredder can do it all

Rotor impact mill (RPMV & RPMX)

Ball shaper operating based on unique crushing principle

Universal shredder (NGU)

Continuous high-performance crusher for all cutting-related applications

Tests give certainty

Which technical solution is the right one for your recycling process? Don’t leave anything to chance. Our team of specialists will test your material at our test center and develop a solution tailored to your specific needs.

Success stories

Recycling company in the UK relies on plant technology from BHS to process ASR fractions, electronic scrap and meatballs

May 2020
A British company commissioned a recycling plant that was planned and implemented by BHS. The plant is designed to handle a variety of materials such as automotive shredder residue (ASR) fractions, electronic scrap and so-called “meatballs” (electric motors and motor armatures). The process developed together with the company is based on a profitability analysis and ensures marketable end products.

Less wear for economically efficient processing of ASR

March 2019
Since March 2019, a BHS-Sonthofen rotor impact mill (type RPMX) has been in operation at Jansen Shredder Recycling BV in Moerdijk, the Netherlands, for the fine processing of automotive shredder residues (ASR). Thanks to years of experience in the processing of metal-bearing waste materials, the experts from Sonthofen found the optimal solution for processing abrasive materials. Wear costs at Jansen have significantly decreased since.

Plant for recycling automotive shredder residues (ASR) in Finland.

July 2017
Kajaanin Romu Oy operates one of Finland’s most cutting-edge plants for recycling scrap in the town of Kajaani, located approximately 500 km northeast of Helsinki. The company commissioned a BHS-Sonthofen plant for processing automotive shredder residue (ASR) fine fractions of particle sizes between 0 and 30 mm. It separates the feed material abundant with valuable metals into ‘light’ and ‘heavy’ fractions in a single pass. This allows the plant operators to economically produce fractions that can be sold profitably. Moreover, the plant significantly reduces the cost of material disposal at landfills.

Don’t let valuables end up at the dump!

January 2016
A metric ton can contain up to 20 grams of gold and up to 200 to 300 grams of silver, as well as platinum and other precious and non-ferrous metals. Heavy non-ferrous fractions of material left over after shredding and processing large automotive, electrical or electronic scrap components still hold a lot of value. Previously, the recyclable materials were deposited in landfills. Based on our unique process, BHS-Sonthofen processing plants can recover these metals.

Technical articles in the media

BHS-Sonthofen supplies rotor mill for ASR processing

June 2020
Sonthofen, Germany-based BHS-Sonthofen says a rotor impact mill (type RPMX) with chilled cast chrome wear parts has proven effective for the processing of automotive shredder residue (ASR) fine materials at Jansen Shredder Recycling BV in Moerdijk, the Netherlands.
recycling today

Economically efficient processing of automotive shredder residues

July 2020
For almost a year, a BHS-Sonthofen rotor impact mill has been in operation at Jansen Shredder Recycling BV in Moerdijk, the Netherlands, for the fine processing of automotive shredder residues (ASR). Thanks to years of experience in the processing of metal-bearing waste materials, the experts from Sonthofen found the optimal machine for processing abrasive materials. Wear costs at Jansen have significantly decreased since.
ALUMINIUM Journal, 7-8 / 2020

Non-ferrous metals from IBA are turned into valuable resources

July 2017
BHS-Sonthofen planned and implemented a turnkey plant for the processing and refinement of metals derived from waste incineration plant slag and other metal-bearing fractions. Recycling machines from BHS are core components of both processing lines, as they allow for efficient shredding. This order from Switzerland is the largest ever for the Recycling Technology division.
recovery, 4/2017

ASR PROCESSING - A FINE POINT TO MAKE

November 2016
Recyclers and equipment makers can work together to maximise the efficient recovery of metals from shredding plant fines fractions. Finnish scrap processing firm Kajaanin Romu Oy has recently begun operating an automated sorting plant downstream of its shredder designed to thoroughly capture the metallic portion of automotive shredder residue (ASR).
recycling today, 11-12/2016

Saving Gold from Landfills - Recovery of metals from fine shredder fractions

September 2014
Fine fractions of shredded automobile scrap and electronic equipment still contain considerable amounts of precious metals which until now have invariably been deposited in landfills. A new one-of-a-kind process allows to reclaim and sell these metals profitably.
bulk solids handling, No. 3/2014

Events

BIOGAS Convention & Trade Fair 2021

12-7-2021 - 12-9-2021
Booth F61 in hall 9 at MEBA Biogas GmbH

IERC 2022

1-19-2022 - 1-21-2022

IFAT 2022

5-30-2022 - 6-3-2022

Satisfied customers worldwide

Contact

Find a sales representative

Find your personal contact person on site. We are there for you worldwide.

Find a sales representative

Find your personal contact person on site. We are there for you worldwide.